nvo:NwRange
Object containing configurable properties for a range of Virtual Network IDs (VNIs).
Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
---|---|---|---|
associateVrfFlag | scalar:Bool |
Configures VNI(s) as L3 VNI. | Supported values are True or False. SELECTION: true or false |
cfgSrc | nvo:CfgSrcT (scalar:Enum16) |
Internal system property. Not intended for external use. | SELECTION: 0 - unknown 1 - cli 2 - controller DEFAULT: 0 |
isLegacyMode | scalar:Bool |
Indicates whether Multicast group configuration for the VNI(s) is configured in legacy mode or not. | SELECTION: true or false |
isMcastRange | scalar:Bool |
Indicates if the multicast group configuration is a range. | SELECTION: true or false |
mcastGroup | mcast:GrpIp (address:Ip) |
Configures multicast group address for VNI(s). | Supported range is valid multicast group addresses. Value must match ipv4 or ipv6 known format |
multisiteIngRepl | nvo:MultisiteIngReplStateT (scalar:Enum16) |
Enable or disable Multisite Ingress Replication for VNI(s). | SELECTION: 1 - disable 2 - enable 3 - enableOptimized DEFAULT: disable |
multisiteMcastGroup | mcast:GrpIp (address:Ip) |
Configures multisite multicast group address for VNI(s). | Supported range is valid multicast group addresses. Value must match ipv4 or ipv6 known format |
spineAnyCastGw | scalar:Bool |
Enable or disable spine anycast gateway for VNI(s). | SELECTION: true or false |
suppressARP | nvo:SuppressARPT (scalar:Enum16) |
Enable or disable ARP suppression for VNI(s). | SELECTION: 0 - off 1 - enabled 2 - disabled DEFAULT: off |
vniRangeMax | nvo:VniT (scalar:Uint32) |
Configures the maximum value for the VNI range. | RANGE: [1 , 16777214] |
vniRangeMin | nvo:VniT (scalar:Uint32) |
Configures the minimum value for the VNI range. | Supported VNI range between 1 to 16777214. RANGE: [1 , 16777214] |
Internal Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
---|---|---|---|
modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |